Browsing by Author "Lipo, Thomas A."
Now showing items 2-21 of 27
-
Coaxial current transformer for test and characterization of high-power semiconductor devices under hard and soft switching
Lyra, Renato O.C.; Cardoso Filho, Braz J.; John, Vinod; Lipo, Thomas A. (Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ, USA, 2000) -
Complex vector model of the squirrel-cage induction machine including instantaneous rotor bar currents
Muñoz, Alfredo R.; Lipo, Thomas A. (Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ, USA, 1999) -
A direct field-oriented controller for induction motor drives using tapped stator windings
Zinger, Donald S.; Profumo, Francesco; Lipo, Thomas A.; Novotny, Donald W. (1990) -
Dual AC-drive system with a reduced switch count
Ledezma, Enrique; McGrath, Brendan; Muñoz, Alfredo R.; Lipo, Thomas A. (Institute of Electrical and Electronics Engineers Inc, 2001) -
Dynamic overmodulation characteristics of triangle intersection PWM methods
Hava, Ahmet M.; Sul, Seung-Ki; Kerkman, Russel J.; Lipo, Thomas A. (IEEE, 1999) -
An Extended Kalman Filter Approach to Rotor Time Constant Measurement in Pwm Induction-Motor Drives
Zai, Li-Cheng; DeMarco, Christopher L.; Lipo, Thomas A. (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 1992) -
Fast-clamped short-circuit protection of IGBT's
John, Vinod; Suh, Bum-Seok; Lipo, Thomas A. (IEEE, 1999) -
Fault tolerant three-phase AC motor drive topologies: a comparison of features, cost, and limitations
Welchko, Brian A.; Lipo, Thomas A.; Jahns, Thomas M.; Schulz, Steven E. (IEEE, 2004) -
General approach to sizing and power density equations for comparison of electrical machines
Huang, Surong; Luo, Jian; Leonardi, Franco; Lipo, Thomas A. (IEEE, Piscataway, NJ, USA, 1998) -
High-frequency modeling for cable and induction motor overvoltage studies in long cable drives
Moreira, Alessandro F.; Lipo, Thomas A.; Venkataramanan, Giri; Bernet, Steffen (Institute of Electrical and Electronics Engineers Inc, 2002) -
High-performance active gate drive for high-power IGBT's
John, Vinod; Suh, Bum-Seok; Lipo, Thomas A. (Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ, USA, 1999) -
High-performance generalized discontinuous PWM algorithm
Hava, Ahmet M.; Kerkman, Russel J.; Lipo, Thomas A. (IEEE, Piscataway, NJ, USA, 1998) -
Hybrid multilevel power conversion system: a competitive solution for high-power applications
Manjrekar, Madhav D.; Steimer, Peter K.; Lipo, Thomas A. (Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ, USA, 2000) -
Magnet-flux-nulling control of interior PM machine drives for improved steady-state response to short-circuit faults
Welchko, Brian A.; Wai, Jackson; Jahns, Thomas M.; Lipo, Thomas A. (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2006) -
New control strategy for optimum-efficiency operation of a synchronous reluctance motor
Matsuo, Takayoshi; El-Antably, Ahmed; Lipo, Thomas A. (IEEE, Piscataway, NJ, USA, 1997) -
New induction motor V/f control method capable of high-performance regulation at low speeds
Munoz-Garcia, Alfredo; Lipo, Thomas A.; Novotny, Donald W. (IEEE, Piscataway, NJ, USA, 1998) -
Novel soft-switched PWM inverter for AC motor drives
Chen, Shaotang; Lipo, Thomas A. (IEEE, Piscataway, NJ, USA, 1996) -
A novel variable-frequency three-phase induction motor drive system using only three controlled switches
Welchko, Brian A.; Lipo, Thomas A. (Institute of Electrical and Electronics Engineers Inc, 2001) -
On-line dead-time compensation technique for open-loop PWM-VSI drives
Muñoz, Alfredo R.; Lipo, Thomas A. (IEEE, Piscataway, NJ, USA, 1999) -
Reduction of DC-bus capacitor ripple current with PAM/PWM converter
Kieferndorf, Frederick D.; Förster, Matthias; Lipo, Thomas A. (IEEE, 2004)